SPRI | Implementing Cisco Service Provider Advanced Routing Solutions
 
The Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) training teaches you theories and practices to integrate advanced routing technologies including routing protocols, multicast routing, policy language, Multiprotocol Label Switching (MPLS), and segment routing, expanding your knowledge and skills in service provider core networks.
 
Objectives
After taking this training, you should be able to:
Configure multiarea OSPF.
Configure OSPF special area types and optimization features.
Configure IS-IS multilevel networks and optimization features.
Configure BGP to influence outbound and inbound BGP route selection.
Implement BGP route reflectors and confederations.
Describe the main characteristics of routing protocol tools that are used in service provider environments.
Implement the Routing Policy Language.
Configure route redistribution.
Troubleshoot routing protocols in the service provider network.
Describe, implement, and troubleshoot MPLS in service provider network.
Describe and implement segment routing technology.
Introduce and implement segment routing IPv6.
Implement BGP security options.
Implement advanced features to improve convergence in BGP networks.
Implement Topology Independent Loop-Free Alternate (TI-LFA).
Describe Cisco MPLS traffic engineering.
Describe how traffic engineering is used in segment routing networks.
Implement and configure advanced SR-TE features.
Implement IPv6 tunneling mechanisms.
Describe IP multicast concepts and technologies.
Implement and verifying the PM-SM protocol.
Implement enhanced PIM-SM features.
Implement MSDP in the interdomain environment.
Implement mechanisms for dynamic RP distribution.
 
How you'll benefit
This training will help you:
Gain the high-demand skills to maintain and operate advanced technologies related to Service Provider core networks.
Increase your knowledge and skills for implementing Service Provider core advanced technologies though hands-on application and practical instruction.
 
Who should enroll
Network administrators
System engineers
Project managers
Network designers
 
Technology areas
Service Provider
 
Prerequisites
There are no prerequisites for this training. However, the knowledge and skills you are recommended to have before attending this training are:
Intermediate to advanced knowledge of Cisco Internetwork Operating System (Cisco IOS®) or IOS XE and Cisco IOS XR Software configuration.
Knowledge of IPv4 and IPv6 TCP/IP networking
Intermediate knowledge of BGP, OSPF, and ISIS routing protocols
Understanding of MPLS technologies
Understanding of multicast technologies
Familiarity with segment routing
These skills can be found in the following Cisco Learning Offerings:
Implementing and Administering Cisco Solutions (CCNA)
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)
 
Outline Course
Configure OSPF Multiarea Networks
Configure OSPF Special Area Types
Configure OSPF Optimization Features
Configure IS-IS Multilevel Networks
Configure IS-IS Optimization Features
Introducing Routing Protocol Tools
Introducing Routing Policy Language
Influencing Outbound BGP Route Selection
Influencing Inbound BGP Route Selection
Scaling BGP in Service Provider Networks
Implementing Route Redistribution
Troubleshooting Routing Protocols
Improving BGP Convergence and Implementing Advanced Operations
Multiprotocol Label Switching
Cisco MPLS Traffic Engineering
Troubleshooting MPLS
 
Segment Routing
Implementing Segment Routing
Segment Routing for IPv6
Implementing Segment Routing for IPv6
Segment Routing TI-LFA
Segment Routing Traffic Engineering
Advanced Segment Routing Traffic Engineering Features
Securing BGP
Deploying IPv6 Tunneling Mechanisms
IP Multicast Concepts and Technologies
Implementing PIM-SM Protocol
Implementing PIM-SM Enhancements
Implementing Interdomain IP Multicast
Implementing MPLS
Implementing Distributed Rendezvous Point Solution in Multicast Network
Lab outline
Implement OSPF Special Area Types (IPv4 and IPv6)
Implement OSPF Route Summarization (IPv4 and IPv6)
Implement Multiarea IS-IS
Implement IS-IS Route Summarization
Implement Outbound BGP Route Selection
Implement Inbound BGP Route Selection
Implement BGP Route Reflectors
Implement Route Redistribution
Troubleshoot Routing Protocols
Configure and Verify IGP Segment Routing
Configure and Verify SRv6
Configure and Verify SR TI-LFA Using OSPF
Configure and Verify SR TI-LFA Using IS-IS
Configure and Verify SR-TE Using OSPF
Configure and Verify SR-TE Using IS-IS
Configure and Verify ODN and Flexible Algorithm
Implement BGP Security Options
Implement Tunnels for IPv6
Enable and Optimize PIM-SM
Implement PIM-SM Enhancements
Implement MPLS in the Service Provider Core
Implement Rendezvous Point Distribution
 
Descargue el temario para conocer el detalle completo de los contenidos
 
Debido a las constantes actualizaciones de los contenidos de los cursos por parte del fabricante, el contenido de este temario puede variar con respecto al publicado en el sitio oficial, sin embargo, Netec siempre entregará la versión actualizada de éste.